How to Install a Battle Back Plate The Right Way

How to install a Battle back plate the right way

Football is a physical game at all levels. With each collision comes the potential for injury. Having the necessary equipment to provide proper protection will make a difference on the field in so many ways. One of those essential pieces of football safety equipment is a back plate.

With a Battle football back plate, you can stay protected from hits that arrive at any angle. But before you go looking for back protection for football players, you need to know how to install a Battle back plate. Read on to find out how easy a back plate installation can be.

What is a Battle Back Plate?

Battle football back plate

The Battle football back plate is as it sounds. It is a small plate that offers additional protection for the lower back. For players who handle the ball – quarterbacks, running backs, and wide receivers – hits can come from all angles, and a shot to the lower back can be devastating.

By adding a back plate, skill position football players can move about the field in confidence. While big hits are never welcome, there won’t have to be any second thoughts about the potential damage to be done to the lower back and kidneys. The key is to know how to install a Battle back plate on your shoulder pads the correct way.

How to Install a Battle Back Plate

Learning how to install Battle football back plates

So, how do you handle a back plate installation? The process is both quick and simple. You should be able to have your new back plate installed in just a few minutes, even if you don’t feel quite so confident going into the process. Check out the four steps for handling a back plate installation below.

  1. Remove the Back Plate and Hardware

When you get a new back plate for your football pads, start by taking the back plate and accompanying hardware out of the package. The hardware should include a pair of nuts – sometimes square nuts – and screws to connect the back plate to the shoulder pads. Keep them safely off to the side because you don’t want to lose any of the hardware that comes with your new back plate.

2. Place the Nuts Between the Padding and the Shell

There are two pieces to any kind of football shoulder pads. There is a hard outer plastic shell that absorbs most of the impact. Beneath that, there is a softer layer, typically made of some sort of foam. That foam is what softens the blow to the body.

Take the square nuts that come with your new back plate and place one under each of the holes in the hard plastic shell. They should fit snugly between the foam and hard plastic, but you can make life easier by guiding them with your fingers and proceeding to the next step.

3. Screw Down the Back Plate

Now that you have the square nuts in place, it is time to secure the back plate into position. For this step, take the screws and hand-tighten them to the nuts that are behind the hard plastic shell. You want to secure them just enough that they won’t fully detach.

4. Tighten with a Screwdriver

Now that the back plate is in place and the screws have been tightened by hand, it is time to go to the final step. Make sure that you tighten the back plate screws snuggly but not too much. The back plate should move freely so that it can move with your body. The back plate should, however, remain snug enough that it doesn’t disconnect.

Make Sure to Have All of Your Battle Safety Equipment

Battle chin straps for football helmets

In addition to a Battle back plate, there are other essential pieces of safety equipment that are a must for every football player. While back protection for football players can help prevent injury, things like chin straps, cleat sleeves, and mouthguards should also be part of any football player’s equipment repertoire.

Chin Straps

The helmet is arguably the most important piece of equipment a player can have. In order to keep that helmet snug while also offering protection to the chin, a chin strap has to be there. The chin strap not only keeps the helmet secure but offers additional cushioning against regular blows to the chin, reducing the chance of concussive blows.


Speaking of concussion prevention, football mouthguards are one of the most critical football safety equipment items. Mouthguards prevent teeth from colliding with one another after an impact, which can drastically reduce the risk of concussive impacts.

Cleat Sleeves

One of the most common injuries in football is an ankle injury. Rolled, sprained, and broken ankles are all too common because of the sudden change of direction that is commonplace in football. Using cleat sleeves or ankle supports, players can garner additional strength and support around the ankle. It Is great for preventing sudden injuries related to a wrong movement or cut.


Protect Yourself & Your Performance with Battle Safety Equipment

Battle Back Plates and the other safety equipment mentioned above are specially engineered to protect football players from serious injuries. And that also means that back plates and similar football safety equipment also protect players’ availability for play, and, in turn, ability to deliver their best performances. Protect your body and performance potential with Battle Sports Back Plates and Essential Football Safety Equipment